Skip to content

Setting up SSH keys

SSH keys provide more convenient and secure authentication. Setting them up is a simple two-step process.

  1. Generate SSH keys on your local workstation.
    • SSH keys are always generated in pairs consisting of one public key and one private key. Generate these keys on the device you intend to use to connect to CSC supercomputers.
  2. Copy the public key from your workstation to a supercomputer.
    • For authenticating an SSH connection using a key pair, you need to copy the public key onto the supercomputer. Do not copy the private key.

Warning

The private key should never be shared with anyone, not even with CSC staff. It should only be stored on the local workstation.

Generating SSH keys

To find out how to generate SSH keys on your local workstation, see the system-specific instructions for:

  1. Unix-based systems (macOS and Linux)
  2. Windows systems

You can come back to these instructions once you are prompted for a file name and storage location for the keys. The following instructions assume you are in the SSH key generation dialog.

If you have not set up SSH keys before, feel free to accept the default name and location by pressing ENTER. However, if using the default file name would overwrite an existing key, you will receive a warning that looks like this:

/home/<username>/.ssh/id_ed25519 already exists. Overwrite (y/n)?

Generally, you do not want to overwrite existing keys, so enter n, run ssh-keygen again and enter a different file name when prompted. See also the section on SSH key files with non-default name or location.

Next, you will be asked for a passphrase. Please choose a secure passphrase. It should be at least 8 characters long and contain numbers, letters and special characters.

Warning

Never leave the passphrase empty when generating an SSH key pair!

SSH key file with non-default name or location

If you want to store your key pair in a non-default location (somewhere else than ~/.ssh/ or C:\Users\<username>\.ssh\), set the key location in the .ssh/config file or using an authentication agent (see system-specific instructions). If you intend to use RStudio, Jupyter notebooks or something else where the connecting from your local workstation to a compute node requires piping through a login node, set agent-forwarding and the path to your private key in the .ssh/config file as follows:

Host <host>.csc.fi
  HostName <host>.csc.fi
  User <username>
  ForwardAgent yes
  IdentityFile /<path-to-key-files>/<private-key>

Host *.bullx
  IdentityFile /<path-to-key-files>/<private-key>

Copying public key to supercomputer

The recommended and easiest way to copy your public key to a CSC system is through the My CSC customer portal. For other approaches, please see the system-specific SSH instructions.

Adding public key in My CSC

You can add your public key through the My CSC customer portal by following these steps:

  1. Log in to My CSC with your CSC or Haka/Virtu credentials.
  2. Open the dropdown menu in the top right corner and select My Profile.
  3. Locate SSH PUBLIC KEYS section and select Add key. As a security measure, you are asked to log in again if it has been a few minutes since you last logged into the portal.
  4. Enter a Title for your key pair, e.g. "my-ssh-key".
  5. Paste your public SSH key into the Key field. The supported key types are RSA 2048, ECDSA 521 and ED25519 256.
  6. Select Add.
  7. You should now see your new key listed under SSH PUBLIC KEYS. Note that it might take up to one hour for your new key to become active. If it takes longer than that, please contact the CSC Service Desk.

Required key format

Your public key should consist of the SSH key type and the key sequence, separated by a single space. If your key is improperly formatted, an error message is displayed. A key in the correct format looks like this: 

ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDlapOdeoxNvz/1AZFRjGAPnPj8pzzz3skI+a+yJS5b7