Skip to content

Accessing databases on Rahti 2 from CSC supercomputers

Many HPC workflows require a database. Running these on the login node poses several issues and running on Pouta brings administration overhead. Rahti 2 is a good candidate, but one obstacle is that Rahti 2 does not support non-HTTP traffic from external sources.

A workaround for this problem is to establish a TCP tunnel over an HTTP-compatible WebSocket connection. This can be achieved using a command-line client for connecting to and serving WebSockets called WebSocat. Here, a WebSocat instance running on Puhti/Mahti translates a database request coming from a workflow to an HTTP-compatible WebSocket protocol. Once the traffic enters Rahti 2 we use another WebSocat instance running inside Rahti 2 to translate back the WebSocket connection to a TCP connection over the original port the database is configured to receive traffic. A drawing of the process is shown below.

Image illustrating a WebSocket connection bridging CSC's HPC environment and a database service on Rahti

This tutorial outlines the steps to achieve this using MariaDB as an example database.

Info

The OpenShift template used below to configure WebSocat on Rahti 2 is an unsupported beta version!

Info

This solution is suitable for computationally light use cases. Reasonable scaling can be expected for up to ~100 processes simultaneously accessing a database on Rahti 2. Exceeding this limit is not advised and may result in performance degradation.

Step 1: Setting up MariaDB and WebSocat on Rahti 2

Configuring MariaDB and WebSocat on Rahti 2 can be done either through the web interface or using the oc command line tool. Notice that your CSC project must have access to the Rahti 2 service. See here how to add service access for a project.

Info

Mind the difference between persistent and ephemeral storage when creating a new database in Rahti 2. Ephemeral databases are meant for temporary storage and should not be considered reliable. If the Pod in which your database is running is deleted or restarted you will lose all your data! To avoid this, create a database with a persistent volume and make sure to also perform regular backups to for example Allas.

Option 1: Using the Rahti 2 web interface

  • Log in to the Rahti 2 web interface. See Getting access for instructions.
  • Deploy MariaDB from the "Developer Catalog". You will find the developer catalog in the +Add section of the Developer menu.
  • Configure the database. You need to at least select or create a Rahti 2 project to which you want to add the database. If creating a new project, make sure to include your CSC project number in the project description in the form csc_project: 2001234
  • Create the database and remember the
    • Connection Username
    • Connection Password
    • Root Password
    • Database name (sampledb by default)
    • Database service name (mariadb by default)
  • After creation, double check the network parameters and remember them:
    • Target port (3306 by default)
    • Hostname address (of the form <service name>.<project name>.svc)
  • An OpenShift template is needed to configure WebSocat on Rahti 2. Download or copy this YAML file to your clipboard. Note: that this is an unsupported beta template
  • Click in the + sign in the upper right corner of the webinterface, and paste the template. Click create.
  • Come back to the "Developer Catalog" and deploy the Websocat template. You need to provide the "Database service name" (mariadb by default) and the "Database port" (3306 by default).
  • In the Developer menu, go to Project -> Route and copy the Location URL. You will use this URL to connect from outside Rahti 2.

Option 2: Using the oc command line tool

oc login https://api.2.rahti.csc.fi:6443 -u <username> -p <password>
  • Create a new project (namespace) or switch to existing one. If creating a new project, make sure to include your CSC project number in the project description in the form csc_project: 2001234
oc new-project <project name> --display-name='My new project'\
   --description='csc_project: <project number>'

or

oc project <project name>
  • Add MariaDB by launching the mariadb-persistent template. Remember the username, password, database name and the database service name. Use the -p flag to modify default parameters
oc new-app --template=mariadb-persistent
  • Add WebSocat by launching the OpenShift template. You can check the target port with oc describe services <service name>. The default parameters for the service name and target port are mariadb and 3306, respectively
oc new-app --file=/path/to/websocat-template.yaml\
  --param=DATABASE_SERVICE=<service name>.<project name>.svc\
  --param=DATABASE_PORT=<port>
  • Remember the route hostname of the form websocat-<project name>.2.rahtiapp.fi. You can check this later with oc get route websocat

If you visit the Route URL with you browser, you should see this message:

Only WebSocket connections are welcome here

Step 2: Running WebSocat on CSC supercomputers

MariaDB and WebSocat have now been set up on Rahti 2 and you should have the following details: MariaDB username, password, database name and the WebSocat route hostname. These are needed when connecting to the database. However, first we need to run the websocat binary on Puhti/Mahti to open the required TCP tunnel.

wget https://github.com/vi/websocat/releases/download/v1.8.0/websocat_amd64-linux-static \
  -O websocat
chmod +x websocat
export PATH=$PATH:$PWD
  • We do not want to run WebSocat on the login node, so open an interactive session with sinteractive -i and launch websocat. By passing 0 as the target port, WebSocat gets handed an available port which we can extract using lsof (the below commands are conveniently put into a script). Recall that the <project name> placeholder in the route hostname provided to websocat refers to the name of your Rahti 2 project
websocat -b tcp-l:127.0.0.1:0 wss://websocat-<project name>.2.rahtiapp.fi -E &
ws_pid=$!  # $! contains the process ID of the most recently executed background command
mkdir -p /tmp/$USER
lsof -i -p $ws_pid 2>/dev/null | grep TCP | grep -oE "localhost:[0-9]*" | \
  cut -d ":" -f2 > /tmp/$USER/${SLURM_JOB_ID}_rahtidb_port
echo "Got target port $(cat /tmp/$USER/${SLURM_JOB_ID}_rahtidb_port)"

Info

If you want to access your database within a batch job, run websocat within your batch script. You can utilize the same obtained target port if you're submitting your job from an interactive session in which websocat is already running, websocat -b tcp-l:127.0.0.1:<port> wss://websocat-<project name>.2.rahtiapp.fi -E &. Otherwise, pass 0 as the target port and check which one it gets handed using lsof.

  • Now websocat is running in the interactive session/batch job and you may connect to your MariaDB database on Rahti 2 using the obtained target port. You can verify the connection with e.g. Python. Note that the username and password below refer to the created database service, not your CSC credentials

Info

For this example to work, you need to install the mariadb python module. At the time of writing this the command to use is: pip3 install mariadb=1.0.11 This is due to the fact that the current last version of the module is broken for the platforms we tested this with. See the upstream documentation for more information: https://mariadb-corporation.github.io/mariadb-connector-python/install.html

# Module Imports
import mariadb
import sys

# Connect to MariaDB Platform
try:
    conn = mariadb.connect(
        user="<username>",
        password="<password>",
        host="127.0.0.1",
        port=<port>,
        database="<database name>"

    )
except mariadb.Error as e:
    print(f"Error connecting to MariaDB Platform: {e}")
    sys.exit(1)

# Get Cursor
cur = conn.cursor()

Note: The websocat client will only listen on IPv4. On some systems it is then necessary to use 127.0.0.1 as host, otherwise IPv6 will be used and it will not connect.