Creating a batch job script for Mahti
Please have a look at the Puhti documentation for the general introduction to batch scripts in the CSC supercomputing environment. On this page we focus on Mahti specific topics.
Only Mahti GPU nodes have NVMe disk on compute nodes.
Otherwise full nodes are allocated for jobs, with the exception of interactive jobs, also see below. Many options also work differently in Puhti and Mahti, so it is not advisable to copy scripts from Puhti to Mahti.
Basic MPI batch jobs
An example of a simple MPI batch job script:
#!/bin/bash #SBATCH --job-name=myTest #SBATCH --account=<project> #SBATCH --time=02:00:00 #SBATCH --partition=medium #SBATCH --nodes=2 #SBATCH --ntasks-per-node=128 module load myprog/1.2.3 srun myprog -i input -o output
Specify the exact number of nodes and number of tasks per node with
--ntasks-per-node, respectively. Use all 128 cores in
- MPI processes should not be started with mpirun or mpiexec. Use
- appropriate software module has to be loaded in the batch job script for the submission to work properly.
Hybrid batch jobs
As explained for Puhti, hybrid
parallelization can run multiple OpenMP threads per MPI task. In addition to the
--ntasks-per-node=X one needs to set
--cpus-per-task=Y. The default is one cpu
(thread) per task. To use all physical cores in a Mahti node choose
X * Y = 128,
like in this example.
If you are using simultaneous multithreading (see section below) your should use
X * Y = 256
The optimal ratio between the number of tasks and cores per tasks varies for each program and job input. Testing is required to find the right combination for your application. You can find some examples for cp2k and NAMD.
Hybrid batch jobs with simultaneous multithreading (SMT)
Mahti is configured so that it doesn't place any theads to the logical cores
by default. SMT support can be enabled with
When this option is used, it is important to use the
--cpus-per-task=Y so that
X * Y = 256. Failing to do so will leave some of the
actual physical cores unallocated and performance will be suboptimal.
Example batch job script for SMT.
GPU batch jobs
Mahti has 24 GPU nodes and each of them has four Nvidia Ampere A100 GPUs and a local 3,8 TB Nvme drive.
The GPUs are available on the
gpumedium partitions using the option:
gpusmallpartition supports only one or two GPU jobs. So the maximum is
#SBATCH --partition=gpusmall #SBATCH --gres=gpu:a100:1
gpumediumpartition will support multi-GPU jobs and only four GPUs per compute node. An example below will allocate four GPUs per compute node so eight GPUs all together.
#SBATCH --nodes=2 #SBATCH --partition=gpumedium #SBATCH --gres=gpu:a100:4
gpumediumis the only gpu partition where more than one compute node is available ( maximun number for the
--nodesflag is six ).
gputest partition is for short test runs. Maximum for the
--time flag is 15 minutes and one job per account can be run in a RUNNING state.
Maximum for the
--nodes flag is one but all four GPUs on a node can be allocated for a test job.
In Mahti fast local storage is only available on GPU nodes and it is good for IO intensive applications.
Request local storage using the
--gres flag in the job submission:
--gres=nvme:100. The local storage reservation is on a per node basis. Use the environment variable $LOCAL_SCRATCH in your batch job scripts to access the local storage on each node.
Multiple resources can be requested with a comma-separated list. Request both GPU and local storage:
--cpus-per-taskflag. The example below will use one GPU and 32 cores are available for cpu threading (32 is 1/4 of the CPU cores of a single node) also 950 GB local fast disk storage (1/4 of the total amount of local disk on a node). Ampere A100 GPU also has its own 40GB memory (and that memory will not need any reservation flag). Default amount of main memory allocated per GPU is 122.5GB
#SBATCH --partition=gpusmall #SBATCH --ntasks=1 #SBATCH --cpus-per-task=32 #SBATCH --gres=gpu:a100:1,nvme:950 # If multithreading is OpenMP implementation then define also OMP_NUM_THREADS environment variable export OMP_NUM_THREADS=$SLURM_CPUS_PER_TASK
If an application requires more memory per core than there is available with full node (2 GB / core) it is possible to use also a subset of cores within a node. Also, if the application is memory bound, memory bandwidth and the application performance can be improved by using only a single core per NUMA domain or L3 cache (look at Mahti technical description for details. Note that billing is, however, always based on full nodes.
When undersubscribing nodes, one should always set
--cpus-per-task=Y so that
X * Y = 128,
even with pure MPI jobs. By default, Slurm scatters MPI tasks
--cpus-per-task apart, i.e. with
--cpus-per-task=8 the MPI task
0 is bound to CPU core 0, the MPI task 1 is bound to CPU
core 7 etc.. Memory bandwidth (and application performance) is
the best when the tasks are executing on maximally scattered cores. As
an example, in order to use 32 GB / core, one can run only with 8
tasks per node as
#SBATCH --ntasks-per-node=8 #SBATCH --cpus-per-task=16 module load myprog/1.2.3 export OMP_NUM_THREADS=1 srun myprog -i input -o output
For hybrid applications, one should use
OMP_PROC_BIND OpenMP runtime environment variable for
placing the OpenMP threads. As an example, in order to run
one MPI task per NUMA domain and one OpenMP thread per L3cache one
#SBATCH --ntasks-per-node=8 #SBATCH --cpus-per-task=16 export OMP_NUM_THREADS=4 export OMP_PROC_BIND=spread module load myprog/1.2.3 srun myprog -i input -o output
Please check also our Mahti batch script examples page.
Using interactive partition for non-parallel pre- or post-processing
In many cases the computing tasks include pre- or post-processing steps that are not able to utilize parallel computing.
In these cases it is recommended that, if possible, the task is split into several, chained, batch jobs and that the non-parallel
processing is executed in the
interactive partition of Mahti.
In the interactive partition the jobs can reserve just few cores so that the non-parallel tasks can be executed without wasting resources.
Note that you can use interactive partition also for non-interactive jobs and that you can link two batch jobs so that the second job starts only when the first one has finished.
For example, say that we would like to post-process the output file, produced with the very first MPI example job in this page. The post processing command:
python post-proc.py output uses only serial computing and requires about 40 minutes and 3 GB of memory. Instead of including the post-processing
to the main job it is reasonable to execute it as separate job in the interactive partition.
Jobs in interactive partition can reserve 1-8 cores and each core reserves 1,875 GB of memory. Thus in this case we will reserve 2 cores
--cpus-per-task=2 to have enough memory (3,75 GB) available. Further,
--dependency=afterok:<slurm-jobid> defines that the job can start only when the previously sent job has successfully finished. Here the
<slurm-jobid> is replaced with ID number of the batch job that produces the output file (you'll get the ID number when you submit the job).
#!/bin/bash #SBATCH --job-name=post-process-myTest #SBATCH --account=<project> #SBATCH --time=00:50:00 #SBATCH --partition=interactive #SBATCH --nodes=1 #SBATCH --ntasks-per-node=1 #SBATCH --cpus-per-task=2 #SBATCH --dependency=afterok:<slurm-jobid> python post-proc.py output
Executing large amounts of small non-MPI jobs
In Mahti, GREASY meta sheduler can be used to process large amounts of small non-MPI jobs. Please check the GREASY instructon page for more details. * GREASY in Mahti