Skip to content

Using Allas storage service to receive sensitive research data

Allas storage service is a general purpose data storage service maintained by CSC. It provides free-of-charge storage space for academic research projects at Finnish universities and research institutes. Allas can be used for storing any kind of research data during the active working phase of a research project. Allas is however not intended for data archiving. You must remove your data from Allas when the research project ends.

There is no automatic back-up processes in Allas. In technical level Allas is very reliable and fault tolerant, but if you, or some of your project members, remove or overwrite some data in Allas, it is permanently lost. Thus you might consider to make a back up copy of your data to some other location.

This document provides an example of how a research group can use Allas service to receive sensitive data from external data provider like a sequencing center.

The steps 1 (Obtaining storage space in Allas), and 2. (Generating encryption keys) require some work, but they need to be done only once. Once you have the keys in place you can move directly to step 3. when you need to prepare a new shared bucket.

1. Obtaining a storage space in Allas

If you are already using Allas service, you can skip this chapter and start from chapter 2. Otherwise do following steps to get access to Allas.

Step 1. Create a user account

If you are not yet CSC customer, register you self to CSC. You can do these steps in the CSC’s customer portal MyCSC (https://my.csc.fi).

Create a CSC account by logging in MyCSC with Haka or Virtu.

Step 2. Create or join a project

In addition to CSC user account, new users must either join a CSC computing project or set up a new computing project. You can use the same project to access other CSC services too like Puhti, cPouta, or SD desktop.

Create a CSC project in MyCSC to apply access to Allas. See if you are eligible to act as a project manager. If your work belongs to any of the free-of-charge use cases, select 'Academic' as the project type. As a project manager, you can invite other users as members to your project.

If you wish to be joined to an existing project, please ask the project manager to add your CSC user account to the project member list.

Step 3. Add Allas access for your project

Add Allas service to your project in MyCSC. Only the project manager can add services. After you have added Allas to the project, the other project members need to login to MyCSC and approve the the terms of use for the service before getting access to Allas.

After these steps, your project has 10 TB storage space available in Allas. Please contact CSC Service Desk (servicedesk@csc.fi) if you need more storage space. The data in Allas can be downloaded to your local environment or to CSC computers. More information about different ways to access data in Allas can be found from Allas user guide.

2. Generating keys for encrypting sensitive data

2.1 What are encryption keys for?

In case of sensitive research data, for example human nucleotide sequence data, the data needs to be properly encrypted before it can be uploaded to Allas. The CSC Sensitive Data Services encrypts data by default with CSC specific key that can be used only in the CSC environment. If you want to use your sensitive data in other locations too you need to create a Crypt4GH compatible key pair consisting of secret key and public key for your own use. You can use the same key pair several times and normally it is practical to use the same keys for all data of a project so that key management does not get too complicated.

Instructions for creating a crypt4gh compatible keys can be found here. (The key generation processes are described in the second steps of graphical user interface and command line client instructions). Once the keys have been generated, you can send the public key to all data producers, so that they can then encrypt the data that they will send for you. After that, only the owners of the private key, i.e. project members, can decrypt the data.

The potential danger with data encryption is that if the the secret key or its’ password is lost, the data can’t be decrypeted by any means anymore. Thus you should store the keys and password so that the information will be preserved also when servers and project members change. On the other hand, the secret key should be moved only to those places were decryption is done and the password should remain unreachable for non-project members.

CSC does not provide an encryption key management system at the moment. If you don't have a acces to a proper key management system, one solution is to store the secret key and a text file containing the password to CSC Sensitive Data environment using SD Connect interface. The interface encrypts this data with CSC public key, after which the project members, and only them, can use SD Desktop service to check, what were the keys and passwords the project uses.

CSC Sensitive Data environment uses Crypt4GH encryption tool, that allows encryption with several public keys. Data encrypted with this way can be opened with several secure keys. If you will utilize sensitive data services of CSC it is handy to use both projects' public key and CSC public key in encryption. This way the data can be used both in users local environment and in the sensitive data services of CSC.

3. Project key generation example:

3.1 Generating keys

In the example below, researcher Tiina Tutkija wants to use Allas to receive and store human sequence data that she will use in her new research project. The project is called AniMINE. It will last several years and it will include several researchers and data sources. Tiina Tutkija already has a customer project with Allas access at CSC.

Now she creates and stores encryption keys for the project. Tiina has cryp4gh-gui encryption program installed on her laptop. She use the Generate Keys option to create a new key pair that is protected with password (in this case H8koGN3lzkke).
The key files generated are named based on the user account of the creator (secret key: ttutkija_crypt4gh.key, public key: ttutkija_crypt4gh.pub ). As the keys will be used by several members of the project, Tiina renames the key files accordingly: animine_crypt4gh.key and animine_crypt4gh.pub.

3.2 Storing keys with SD Connect

Next Tiina Tutkija logs in SD Connect service. After connecting she checks that Current project setting refers to the CSC project that AniMINE project will be using. After that she clicks the Create bucket button to create a new bucket called animine_keys. Then she uses the same button to create another bucket called animine_pub.

Now SD Connect contains two new empty buckets. Tiina opens to bucket amimine_keys and uses Upload button to start upload process. In the upload page she checks that options Encrypt files before upload is on (which is the default setting). Then she uses Select files for upload to select both key files to be uploaded and starts the upload process by clicking button Encrypt and upload in the bottom of the page. After upload she needs to press the reload button of the browser to update the state of the browser.

When the upload is ready Tiina switches back to the Browser view of SD Connect and moves to the bucket animine_pub. She clicks the upload button again and this time turns off Encrypt files before upload and then uploads ONLY the public key (animine_crypt4gh.pub) to this bucket.

After upload she again needs to press the reload button of the browser to update the state of the browser.

Finally she opens a simple text editor to create short instructions file about the keys. The content of the file, named as animine_key_instructions.txt, is following:

---------------------------------------------------------------------------------------------------------
AniMINE  encryption keys created on 16.3. 2022 by project manager Tiina Tutkija.
Following key files are used to encrypt sensitive data used by AniMINE project.
Keys are used with crypt4gh encryption tool.
Public key:   animine_crypt4gh.pub
Secret key:   animine_crypt4gh.key
The password of the secret key is:  H8koGN3lzkke
Note that the secret key and password should never be given or shown to 
users that are not members of this project.

You can find a readable copy of the public key in SD Connect in location
    animine_pub/animine_crypt4gh.pub

You can freely download and send this public key to persons and organizations 
that provide data for AniMINE project. If you want to use data, that has 
been protected using this key pair, locally, please contact project manager 
Tiina Tutkija to get your own copy of the secret key and instructions for 
local decryption. Please use this document, that is readable only in the 
SD Desktop environment of this project, as the only written reference 
for the password. 

Delete the local copy of the secret key when it is no longer actively used. 
------------------------------------------------

She uploads this text file to the animine_keys bucket with the default encryption option on and then deletes the file from her local computer.

Now the bucket animine_keys contain objects: * data/animine_crypt4gh.pub.c4gh * data/animine_crypt4gh.key.c4gh * data/animine_key_instructions.txt.c4gh

And bucket animine_pub contains object: * data/animine_crypt4gh.pub

4. Opening a storage bucket for importing data from data producer.

Once you have access to Allas, you can create a new data bucket there and share this bucket with the data producer. This approach requires that the data producer too has a project at CSC. Usually the Finnish academic data producers, like sequencing centers, have a CSC project. You can copy the public key of your project to the shared bucket or sent the public key to the data producer by some other means.

We recommend that you ask the data producer to encrypt your data with CSC public key and with the key of your project. This way you can use the data both in your local secure environment and in CSC Sensitive Data Services.

4.1 Using Puhti to create a shared bucket

If you know the project number of the data producer, you can easily create a shared Allas bucket using a-tools commands in Puhti. First open terminal connection to puhti.csc.fi (use ssh, PuTTy, or terminal connection from https://puhti.csc.fi ).

In chapter 2.2 we had researcher Tiina Tutkija who created encryption keys and stored them to Allas. In her case a shared bucket could be created with following commands.

First Tiina Tutkija opens connction to Puhti. In browser , she moves to URL: https://puhti.csc.fi.

And logs in with her CSC account. Once the web interface of Puhti is open she opens terminal connection with tool:

Tools/Login node shell

This tool provides terminal connection to Puhti.

In the terminal, Tiina activates connection to Allas: 

module load allas
allas-conf
Then she creates a new shared bucket with commad:

make-shared-bucket
The command asks first the name of the bucket to be cretaed. In this case, Tiina uses bucketname: 
make-shared-bucket
This tool creates a new bucket and shares it with the collaborator. The command asks first for the name of the bucket to be created. In this case Tiina uses bucket name animine_data_import_1.

Then the comand ask for the name of the project who should have access to the the bucket: The project name of data producer is in this example project_2000111.

Then she downloads the public key to Puhti:

a-get animine_pub/data/animine_crypt4gh.pub
And uploads the key to the shared bucket:

a-put animine_crypt4gh.pub -b animine_data_import_1

Finally Tiina sends the name of the shared bucket to the data producer and ask them to encrypt the data to be uploaded with both the public key that they can find form the bucket and the CSC public key.

4.2 Revoke bucket sharing after data transport

Moving large datasets (several terabytes) of data to Allas can take a long time. Aftwer few days data produces tells Tiina that all data has been imported to the shared animine_data_import_i1 bucket in Allas. Tiina can now remove the external access rights from the bucket with command:

a-access -rw project_2000111 animine_data_import_1

5. Using encrypted data

The data stored to CSC using the procedure above is accessible only to the members of the research group. The data is encrypted with both CSC public key and resreach groups own public key. If the data is accessed through SD Desktop the decryption of data is done automatically by the Data Gateway tool when data is used in the working environment.

If the data is used in other environments, decryption must be done by the user.

In SD Connect service the shared bucket, in this example animine_data_import_1, needs some preparations befor the uploaded data can be downloaded.

First user must share the bucket to her own project too. After that the uploaded data can be accessed, not through the normal data Browser view but through the Shared view of SD Connect.

In the example above researcher Tiina Tutkija shared a data bucket animine_data_import_1 in Allas service to receive data from sequencing center. The sequencing center uploaded file run_12_R1.fastq.c4gh to the bucket. Tiina can now use SD Connect to download this file to her local computer.

  • First Tiina checks the Project Identifier string of her project and copies it to the clip board.

  • Then on the Browser view of SD Connect she presses the Share button of the bucket (animine_data_import_1). This opens the Bucket sharing page. Here Tiina turns on read and write permissions and adds her Project Identifier ( shown in the user information page of SD Connect) to the field: Project Identifiers to share with. The sharing is activated by cliking the Share button.

  • Next Tiina moves to the Shared to the project view which now includes bucket animine_data_import_1. She can now open the bucket and start downloading the data.

However, after download the file is still in ecrypted format. To decrypt the file Tiina opens the cryp4gh-gui encryption tool that she previously installed to her computer to create the encryption keys.

Now she uses this tool to decrypt the data. In crypt4gh interfave she first clicks Load My Private Key and the selects the animine_crypt4gh.key that is the secret key used by her research project. Then se uses Select File to select the file run_12_R1.fastq.c4gh she just downloaded to her computer. Next she clicks Decrypt File boutton. crypt4gh-gui will now ask the password of the secret key (H8koGN3lzkke in this case) after which a decryted version of the file, run_12_R1.fastq, is created next to the encryprted file. Tiina can now remove run_12_R1.fastq.c4gh from her local computer and start working with the run_12_R1.fastq file.